net.posprinter.utils

类 DataForSendToPrinterTSC

java.lang.Object

net.posprinter.utils.DataForSendToPrinterTSC

public class DataForSendToPrinterTSC
extends java.lang.Object

作者:

chensong
本类为指令处理工具类。该类处理的指令只适用于条码打印机系列的产品； 具体指令的描述和效果请参考编程手册TSC条码打印机指令TSPL手册.pdf

构造器概要

构造器

构造器和说明
DataForSendToPrinterTSC()

方法概要

方法

限定符和类型	方法和说明
static byte[]	autoDetect(int x, int y) This command feeds the paper through the gap/black mark sensor in an effort to determine the paper and gap/black mark sizes, respectively.
static byte[]	backFeed(int n) This command feeds the label in reverse.
static byte[]	bar(int x, int y, int width, int heigth) 在標籤上畫線 This command draws a bar on the label format.
static byte[]	barCode(int x, int y, java.lang.String codeType, int heigth, int human, int rotation, int narrow, int wide, java.lang.String content) 該指令用來畫一維條螞，共計 23 種 详细注解请查看编程手册 This command prints 1D barcodes.
static byte[]	bitmap(int x, int y, int mode, Bitmap bitmap, BitmapToByteData.BmpType bmpType) 該指令用於在標籤上繪製點陣圖(非 BMP 格式圖檔) This command draws bitmap images (as opposed to BMP graphic files).
static byte[]	blineBydot(int m, int n) 该指令用于设定黑标的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
static byte[]	blineByinch(double m, double n) 该指令用于设定黑标的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
static byte[]	blineBymm(double m, double n) 该指令用于设定黑标的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
static byte[]	blineDetect(int x, int y) This command feeds the paper through the black mark sensor in an effort to determine the paper and black mark sizes, respectively.
static byte[]	block(int x, int y, int width, int height, java.lang.String font, int rotation, int x_multiplication, int y_multiplication, int space, int alignment, java.lang.String content) This command prints paragraph on label.
static byte[]	block(int x, int y, int width, int height, java.lang.String font, int rotation, int x_multiplication, int y_multiplication, java.lang.String content) This command prints paragraph on label.
static byte[]	box(int x, int y, int x_end, int y_end, int thickness) 该指令用于在标签上绘制矩形 This command draws rectangles on the labe BOX x,y,x_end,y_end,line thickness[,radius] 详细介绍请参考编程手册
static byte[]	checkPrinterStateByPort4000() 此指令使用于4000端口，发一次，打印机返回一次代表状态的数据
static byte[]	checkPrinterStateByPort9100() This command obtains the printer status at any time, even in the event of printer error.
static byte[]	cls() 該指令用於清除影像緩衝區(image buffer)的資料 This command clears the image buffer.
static byte[]	codeBlockFMode(int x, int y, int rotation, int row_height, int module_width, java.lang.String content) This command draws CODABLOCK F mode barcode.
static byte[]	codePage(java.lang.String n) 該指令用於定義可攜式鍵盤(選配，KP-200)每個字母按鍵所對應的國際字元集 CODEPAGE n
static byte[]	country(java.lang.String n) 該指令用於設定可攜式鍵盤(選配，KP-200)LCD 因國　的不同而顯示所需的字元 This command orients the keyboard for use in different countries via defining special characters on the KP-200 series portable LCD keyboard (option).
static byte[]	cut() 使用該指令時，打印機將立即裁切 This command activates the cutter to immediately cut the labels without back feeding the label.
static byte[]	delay(int ms) Let the printer wait specific period of time then go on next command.
static byte[]	density(int n) This command sets the printing darkness DENSITY n
static byte[]	direction(int n) 該指令用於定義打印時出紙的方向 This command defines the printout direction and mirror image.
static byte[]	disPlay(java.lang.String s) This command can show the image, which is in printer’s image buffer, on LCD panel DISPLAY IMAGE/OFF
static byte[]	dmatrix(int x, int y, int width, int height, int xm, int row, int col, java.lang.String expression, java.lang.String content) 該指令用來繪製 DataMatrix 二維條碼 DMATRIX x, y, width, height, [xm, row, col], expression
static byte[]	dmatrix(int x, int y, int width, int height, java.lang.String expression, java.lang.String content)
static byte[]	downLoad(java.lang.String filename) Download 程序文档 DOWNLOAD ”EXAMPLE.BAS”
static byte[]	downLoad(java.lang.String filename, Bitmap bitmap) Download 图档 DOWNLOAD ”FILENAME.PCX” ,FILE SIZE,DATA　CONTENT...
static byte[]	downLoad(java.lang.String filename, int size, java.lang.String content) Download 文本文档 DOWNLOAD ”FILENAME” ,DATA SIZE,DATA　CONTENT...
static byte[]	downLoad(java.lang.String filename, java.lang.String filepath) Download 文本文件 DOWNLOAD ”FILENAME” ,FILE SIZE,DATA　CONTENT...
static byte[]	ellipse(int x, int y, int width, int height, int thickness) This command draws an ellipse on the label.
static byte[]	eoj() Let the printer wait until process of commands (before EOJ) be finished then go on the next command.
static byte[]	eop() End of program.
static byte[]	erase(int x, int y, int width, int height) 該指令用於　除影像緩衝區　部份區域的資料 This command clears a specified region in the image buffer.
static byte[]	feed(int n) 該指令用於控制進紙的距離，以點(dot)表示 This command feeds label with the specified length.
static byte[]	files() This command prints out the total memory size, available memory size and files lists (or lists the files through RS-232) in the printer memory (both FLASH memory and DRAM).
static byte[]	formFeed() 該指令可命令打印機進一張紙 This command feeds label to the beginning of next label
static byte[]	gapBydot(int m, int n) 该指令定义两张标签纸间的垂直间距距离 Defines the gap distance between two labels.
static byte[]	gapByinch(double m, double n) 该指令定义两张标签纸间的垂直间距距离 Defines the gap distance between two labels.
static byte[]	gapBymm(double m, double n) 该指令定义两张标签纸间的垂直间距距离 Defines the gap distance between two labels .
static byte[]	gapDetect() This command feeds the paper through the gap sensor in an effort to determine the paper and gap sizes, respectively.
static byte[]	gapDetect(int x, int y) This command feeds the paper through the gap sensor in an effort to determine the paper and gap sizes, respectively.
static byte[]	home() 一般開機後打印第一張標籤時，打印位置都會不準確，打印第二張標籤時打印位置就會正確，若要開機後第一張標籤就要打印在正確的位置，可使用該指令 This command will feed label until the internal sensor has determined the origin.
static byte[]	initialPrinter() This command can restore printer settings to defaults.
static byte[]	kill(java.lang.String filename) This command deletes a file in the printer memory.
static byte[]	limitFeedBydot(int n) 該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙 LIMITFEED n
static byte[]	limitFeedByinch(double n) 該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙 LIMITFEED n
static byte[]	limitFeedBymm(double n) 該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙 LIMITFEED n
static byte[]	move() This command moves downloaded files from DRAM to FLASH memory.
static byte[]	offSetBydot(int m) 該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
static byte[]	offSetByinch(double m) 該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
static byte[]	offSetBymm(double m) 該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
static byte[]	pdf417(int x, int y, int width, int height, int rotate, java.lang.String option, java.lang.String content) 該指令用來打印 PDF417 二維條碼 This command defines a PDF417 2D bar code.
static byte[]	print(int m) 該指令用於打印出儲存於影像緩衝區　的資料 This command prints the label format currently stored in the image buffer.
static byte[]	print(int m, int n) 該指令用於打印出儲存於影像緩衝區　的資料 This command prints the label format currently stored in the image buffer.
static byte[]	putBmp(int x, int y, java.lang.String filename) This command prints BMP format images.
static byte[]	putBmp(int x, int y, java.lang.String filename, int bpp, int contrast) This command prints BMP format images.
static byte[]	putpcx(int x, int y, java.lang.String filename) This command prints PCX format images.
static byte[]	qrCode(int x, int y, java.lang.String eccLevel, int cellWidth, java.lang.String mode, int rotation, java.lang.String content) This command prints QR code.
static byte[]	qrCode(int x, int y, java.lang.String eccLevel, int cellWidth, java.lang.String mode, int rotation, java.lang.String model, java.lang.String mask, java.lang.String content) This command prints QR code.
static byte[]	reference(int x, int y) 該指令用於定義標籤的參考座標原點 This command defines the reference point of the label.
static byte[]	reverse(int x, int y, int width, int height) This command reverses a region in image buffer.
static byte[]	run(java.lang.String filename) This command executes a program resident in the printer memory.
static byte[]	selfTest() At this command, the printer will print out the printer information SELFTEST [page]
static byte[]	selfTest(java.lang.String page) At this command, the printer will print out the printer information SELFTEST [page]
static void	setCharsetName(java.lang.String charset) 设置将打印内容传输给打印机所采用的字符编码，默认为中文编码“gbk”
static byte[]	shift(int n) This command moves the label’s vertical position.
static byte[]	sizeBydot(int m, int n) 该指令用于设定标签纸的宽度及长度 This command defines the label width and length.
static byte[]	sizeByinch(double m, double n) 该指令用于设定标签纸的宽度及长度 This command defines the label width and length.
static byte[]	sizeBymm(double m, double n) 该指令用于设定标签纸的宽度及高度 This command defines the label width and length.
static byte[]	sound(int level, int interval) 該指令用於控制蜂鳴器的頻率，可設定 10 階的聲音，每階聲因的長短由第二個參數控制 This command controls the sound frequency of the beeper.
static byte[]	speed(double n) 該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式 This command defines the print speed SPEED n
static byte[]	text(int x, int y, java.lang.String font, int rotation, int x_multiplication, int y_multiplication, java.lang.String content) This command prints text on label.

从类继承的方法 java.lang.Object

equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

构造器详细资料

DataForSendToPrinterTSC

public DataForSendToPrinterTSC()

方法详细资料

setCharsetName

public static void setCharsetName(java.lang.String charset)

设置将打印内容传输给打印机所采用的字符编码，默认为中文编码“gbk”

参数:

charset - 字符编码类型（打印机所能识别的字符编码类型，具体请参考编程手册代码页设置）

sizeBymm

public static byte[] sizeBymm(double m,
              double n)

该指令用于设定标签纸的宽度及高度 This command defines the label width and length.
SIZE m mm,n mm

参数:

m - ,Label width (inch/ mm/ dot)

n - ,Label length (inch/ mm/ dot)

返回:

byte[]

sizeByinch

public static byte[] sizeByinch(double m,
                double n)

该指令用于设定标签纸的宽度及长度 This command defines the label width and length.
SIZE m mm,n mm

参数:

m - ,Label width (inch/ mm/ dot)

n - ,Label length (inch/ mm/ dot)

返回:

byte[]

sizeBydot

public static byte[] sizeBydot(int m,
               int n)

该指令用于设定标签纸的宽度及长度 This command defines the label width and length.
SIZE m mm,n mm

参数:

m - ,Label width (inch/ mm/ dot)

n - ,Label length (inch/ mm/ dot)

返回:

byte[]

gapByinch

public static byte[] gapByinch(double m,
               double n)

该指令定义两张标签纸间的垂直间距距离 Defines the gap distance between two labels.
GAP m,n

参数:

m,The - gap distance between two labels
0 ≤ m ≤1 (inch), 0 ≤ m ≤ 25.4 (mm)
0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware

n,The - offset distance of the gap
n ≤ label length (inch or mm)

返回:

byte[]

gapBymm

public static byte[] gapBymm(double m,
             double n)

该指令定义两张标签纸间的垂直间距距离 Defines the gap distance between two labels
. GAP m,n

参数:

m,The - gap distance between two labels
0 ≤ m ≤1 (inch), 0 ≤ m ≤ 25.4 (mm)
0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware

n,The - offset distance of the gap
n ≤ label length (inch or mm)

返回:

byte[]

gapBydot

public static byte[] gapBydot(int m,
              int n)

该指令定义两张标签纸间的垂直间距距离 Defines the gap distance between two labels.
GAP m,n

参数:

m - The gap distance between two labels,0 ≤ m ≤1 (inch), 0 ≤ m ≤ 25.4 (mm)
0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware

n - The offset distance of the gap
n ≤ label length (inch or mm)

返回:

byte[]

gapDetect

public static byte[] gapDetect(int x,
               int y)

This command feeds the paper through the gap sensor in an effort to determine the paper and gap sizes, respectively. This command references the user’s approximate measurements. If the measurements conflict with the actual size, the GAPDETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts.

参数:

x - Paper length (in dots)

y - Gap length (in dots)

返回:

byte[]

gapDetect

public static byte[] gapDetect()

This command feeds the paper through the gap sensor in an effort to determine the paper and gap sizes, respectively. This command references the user’s approximate measurements. If the measurements conflict with the actual size, the GAPDETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts.

参数:

X - Paper length (in dots)

Y - Gap length (in dots)

返回:

byte[]

blineDetect

public static byte[] blineDetect(int x,
                 int y)

This command feeds the paper through the black mark sensor in an effort to determine the paper and black mark sizes, respectively. This command references the user’s approximate measurements. If the measurements conflict with the actual size, the BLINEDETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts.

参数:

X - Paper length (in dots)

Y - Gap length (in dots)

返回:

byte[]

autoDetect

public static byte[] autoDetect(int x,
                int y)

This command feeds the paper through the gap/black mark sensor in an effort to determine the paper and gap/black mark sizes, respectively. This command references the user’s approximate measurements. If the measurements conflict with the actual size, the AUTODETECT command will not work properly. This calibration method can be applied to the labels with pre-printed logos or texts.

参数:

X - Paper length (in dots)

Y - Gap length (in dots)

返回:

byte[]

blineByinch

public static byte[] blineByinch(double m,
                 double n)

该指令用于设定黑标的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
BLINE m,n

参数:

m - The height of black line either in inch or mm
0 ≤ m ≤ 1 (inch), 0 ≤ m ≤ 25.4 (mm) 0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware

n - The extra label feeding length
0 ≤ n ≤ label length

返回:

byte[]

blineBymm

public static byte[] blineBymm(double m,
               double n)

该指令用于设定黑标的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
BLINE m dot,n dot

参数:

m - The height of black line either in inch or mm
0 ≤ m ≤ 1 (inch), 0 ≤ m ≤ 25.4 (mm)
0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware

n - The extra label feeding length
0 ≤ n ≤ label length

返回:

byte[]

blineBydot

public static byte[] blineBydot(int m,
                int n)

该指令用于设定黑标的高度及偏移位置 This command sets the height of the black line and the user-defined extra label feeding length each form feed takes.
BLINE m mm,n mm

参数:

m - The height of black line either in inch or mm
0 ≤ m ≤ 1 (inch), 0 ≤ m ≤ 25.4 (mm)
0 ≤ m ≤5 (inch), 0 ≤ m ≤ 127 (mm) / since V6.21 EZ and later firmware

n - The extra label feeding length
0 ≤ n ≤ label length

返回:

byte[]

offSetByinch

public static byte[] offSetByinch(double m)

該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
OFFSET m

参数:

mThe - offset distance (inch or mm)
-1 ≤ m ≤ 1 (inch)

返回:

byte[]

offSetBymm

public static byte[] offSetBymm(double m)

該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
OFFSET m

参数:

mThe - offset distance (inch or mm)
-1 ≤ m ≤ 1 (inch)

返回:

byte[]

offSetBydot

public static byte[] offSetBydot(int m)

該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式。
OFFSET m

参数:

mThe - offset distance (inch or mm)
-1 ≤ m ≤ 1 (inch)

返回:

byte[]

speed

public static byte[] speed(double n)

該指令用於控制在剝離模式時(pee-off mode)每張標籤停止的位置，該指令僅適用於剝離模式
This command defines the print speed
SPEED n

参数:

n - Printing speed in inch per second 1

返回:

byte[]

density

public static byte[] density(int n)

This command sets the printing darkness
DENSITY n

参数:

n - 0~15
0: specifies the lightest level
15: specifies the darkest level

返回:

byte[]

direction

public static byte[] direction(int n)

該指令用於定義打印時出紙的方向
This command defines the printout direction and mirror image. This will be stored in the printermemory.
DIRECTION n[,m]

参数:

n - 0 or 1. Please refer to the illustrations below

返回:

byte[]

reference

public static byte[] reference(int x,
               int y)

該指令用於定義標籤的參考座標原點
This command defines the reference point of the label. The reference (origin) point varies with the print direction, as shown:
REFERENCE x, y

参数:

x - Horizontal coordinate (in dots)

y - Vertical coordinate (in dots)

返回:

byte[]

shift

public static byte[] shift(int n)

This command moves the label’s vertical position. A positive value moves the label further from the printing direction; a negative value moves the label towards the printing direction. For a visual representation, see next page.
SHIFT n

参数:

n - The maximum value is 1 inch. For 200 dpi printers, the range is –203 to 203; for 300 dpi printers, the range is –300 to 300. The unit is dot.

返回:

byte[]

country

public static byte[] country(java.lang.String n)

該指令用於設定可攜式鍵盤(選配，KP-200)LCD 因國　的不同而顯示所需的字元
This command orients the keyboard for use in different countries via defining special characters on the KP-200 series portable LCD keyboard (option).
COUNTRY n

参数:

n - 001: USA
002: Canadian-French
003: Spanish (Latin America)
031: Dutch
032: Belgian
033: French (France)
034: Spanish (Spain)
036: Hungarian
038: Yugoslavian
039: Italian
041: Switzerland
042: Slovak
044: United Kingdom
045: Danish
046: Swedish
047: Norwegian
048: Polish
049: German
055: Brazil
061: English (International)
351: Portuguese
358: Finnish

返回:

byte[]

codePage

public static byte[] codePage(java.lang.String n)

該指令用於定義可攜式鍵盤(選配，KP-200)每個字母按鍵所對應的國際字元集
CODEPAGE n

参数:

n - 字元集的名字或代表號，可進一步區分為 7-bit 或 8-bit
\

返回:

byte[]

cls

public static byte[] cls()

該指令用於清除影像緩衝區(image buffer)的資料
This command clears the image buffer.
CLS

返回:

byte[]

feed

public static byte[] feed(int n)

該指令用於控制進紙的距離，以點(dot)表示
This command feeds label with the specified length. The length is specified by dot
FEED n

参数:

n - unit: dot
1 ≤ n ≤ 9999

返回:

byte[]

backFeed

public static byte[] backFeed(int n)

This command feeds the label in reverse. The length is specified by dot
BACKFEED n

参数:

n - unit: dot,1 ≤ n ≤ 9999

返回:

byte[]

formFeed

public static byte[] formFeed()

該指令可命令打印機進一張紙
This command feeds label to the beginning of next label

返回:

byte[]

home

public static byte[] home()

一般開機後打印第一張標籤時，打印位置都會不準確，打印第二張標籤時打印位置就會正確，若要開機後第一張標籤就要打印在正確的位置，可使用該指令
This command will feed label until the internal sensor has determined the origin. Size and gap of the label should be defined before using this command.
HOME

返回:

byte[]

print

public static byte[] print(int m,
           int n)

該指令用於打印出儲存於影像緩衝區　的資料
This command prints the label format currently stored in the image buffer.
PRINT m [,n]

参数:

m - Specifies how many sets of labels will be printed.1 ≤ m ≤ 999999999

n - Specifies how many copies should be printed for each particular label set.1 ≤ n ≤ 999999999

返回:

byte[]

print

public static byte[] print(int m)

該指令用於打印出儲存於影像緩衝區　的資料
This command prints the label format currently stored in the image buffer.
PRINT m [,n]

参数:

m - Specifies how many sets of labels will be printed.1 ≤ m ≤ 999999999

n - Specifies how many copies should be printed for each particular label set.1 ≤ n ≤ 999999999

返回:

byte[]

sound

public static byte[] sound(int level,
           int interval)

該指令用於控制蜂鳴器的頻率，可設定 10 階的聲音，每階聲因的長短由第二個參數控制
This command controls the sound frequency of the beeper. There are 10 levels of sounds. The timingcontrol can be set by the “interval” parameter.
SOUND level,interval

参数:

level - Sound level: 0~9

interval - Sound interval: 1~4095

返回:

byte[]

cut

public static byte[] cut()

使用該指令時，打印機將立即裁切
This command activates the cutter to immediately cut the labels without back feeding the label.
CUT

返回:

byte[]

limitFeedByinch

public static byte[] limitFeedByinch(double n)

該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙
LIMITFEED n

参数:

n - 可使用英寸或公釐

返回:

byte[]

limitFeedBymm

public static byte[] limitFeedBymm(double n)

該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙
LIMITFEED n

参数:

n - 可使用英寸或公釐

返回:

byte[]

limitFeedBydot

public static byte[] limitFeedBydot(int n)

該指令用於設定打印機進紙時，若經過所設定的長度仍無法偵測到垂直間距，則打印機發生錯誤，停止進紙
LIMITFEED n

参数:

n - 可使用英寸或公釐

返回:

byte[]

selfTest

public static byte[] selfTest()

At this command, the printer will print out the printer information
SELFTEST [page]

返回:

byte[]

selfTest

public static byte[] selfTest(java.lang.String page)

At this command, the printer will print out the printer information
SELFTEST [page]

参数:

page - omitted: Print a self-test page with whole printer information.
PATTERN: Print a pattern to check the status of print head heat line.
ETHERNET: Print a self-test page with Ethernet settings.
WLAN: Print a self-test page with Wi-Fi settings.
RS232: Print a self-test page with RS-232 settings.
SYSTEM: Print a self-test page with printer settings.
Z: Print a self-test page with emulated language settings.

返回:

byte[]

eoj

public static byte[] eoj()

Let the printer wait until process of commands (before EOJ) be finished then go on the next command.
EOJ
This command has been supported since V6.39 EZ and later firmware.

返回:

byte[]

delay

public static byte[] delay(int ms)

Let the printer wait specific period of time then go on next command.
DELAY ms

参数:

ms - The specific period of time. Unit is millisecond. 1000 ms = 1 second

返回:

byte[]

disPlay

public static byte[] disPlay(java.lang.String s)

This command can show the image, which is in printer’s image buffer, on LCD panel
DISPLAY IMAGE/OFF

参数:

s - IMAGE Show the image in printer’s image buffer on LCD panel.
OFF Disable this function.

返回:

byte[]

initialPrinter

public static byte[] initialPrinter()

This command can restore printer settings to defaults.
INITIALPRINTER

返回:

byte[]

bar

public static byte[] bar(int x,
         int y,
         int width,
         int heigth)

在標籤上畫線
This command draws a bar on the label format.
BAR x,y,width,height

参数:

x - The upper left corner x-coordinate (in dots)

y - The upper left corner y-coordinate (in dots)

width - Bar width (in dots)

height - Bar height (in dots)

返回:

byte[]

barCode

public static byte[] barCode(int x,
             int y,
             java.lang.String codeType,
             int heigth,
             int human,
             int rotation,
             int narrow,
             int wide,
             java.lang.String content)

該指令用來畫一維條螞，共計 23 種
详细注解请查看编程手册
This command prints 1D barcodes. The available barcodes are listed below:
BARCODE X,Y,”codetype”,height,humanreadable,rotation,narrow,wide,[alignment,]”content “

返回:

byte[]

bitmap

public static byte[] bitmap(int x,
            int y,
            int mode,
            Bitmap bitmap,
            BitmapToByteData.BmpType bmpType)

該指令用於在標籤上繪製點陣圖(非 BMP 格式圖檔)
This command draws bitmap images (as opposed to BMP graphic files).
BITMAP X,Y,width,height,mode,bitmap data…

参数:

x - Specify the x-coordinate

y - Specify the y-coordinate

width - Image width (in bytes)

height - Image height (in dots)

mode - Graphic modes listed below:
0: OVERWRITE
1: OR
2: XOR

bitmap - data Bitmap data

bmpType - 图片处理类型

返回:

byte[]

box

public static byte[] box(int x,
         int y,
         int x_end,
         int y_end,
         int thickness)

该指令用于在标签上绘制矩形
This command draws rectangles on the labe
BOX x,y,x_end,y_end,line thickness[,radius]
详细介绍请参考编程手册

参数:

x - Specify x-coordinate of upper left corner (in dots)

y - Specify y-coordinate of upper left corner (in dots)

x_end - Specify x-coordinate of lower right corner (in dots)

y_end - Specify y-coordinate of lower right corner (in dots)

line - thickness Line thickness (in dots)

radius - Optional. Specify the round corner. Default is 0.

thickness -

返回:

byte[]

ellipse

public static byte[] ellipse(int x,
             int y,
             int width,
             int height,
             int thickness)

This command draws an ellipse on the label.
ELLIPSE x,y,width,height,thickness

参数:

x - Specify x-coordinate of upper left corner (in dots)

y - Specify y-coordinate of upper left corner (in dots)

width - Specify the width of the ellipse (in dots)

height - Specify the height of the ellipse (in dots)

thickness - Thickness of the ellipse (in dots)

返回:

byte[]

codeBlockFMode

public static byte[] codeBlockFMode(int x,
                    int y,
                    int rotation,
                    int row_height,
                    int module_width,
                    java.lang.String content)

This command draws CODABLOCK F mode barcode.
CODABLOCK x,y,rotation,[row height,]module width,]”content”

参数:

x - Specify the x-coordinate

y - Specify the y-coordinate

rotation - 0 : No rotation
90 : Rotate 90 degrees clockwise
180 : Rotate 180 degrees clockwise
270 : Rotate 270 degrees clockwise

row_height - The height of individual row equals to row height x module width (Default is 8)

module_width - Width of narrow element of CODABLOCK in dots (Default is 2)

content - content of CODABLOCK bar code

返回:

byte[]

dmatrix

public static byte[] dmatrix(int x,
             int y,
             int width,
             int height,
             int xm,
             int row,
             int col,
             java.lang.String expression,
             java.lang.String content)

該指令用來繪製 DataMatrix 二維條碼
DMATRIX x, y, width, height, [xm, row, col], expression

参数:

x - 條碼水平方向啟始位置，以點(dot)表示

y - 條碼垂直方向啟始位置，以點(dot)表示

width - 條碼寬度，以點(dot)表示

height - 條碼高度，以點(dot)表示

xm - 模組尺寸，以點(dot)表示

row - 條碼列數 Symbol size of row: 10 to 144

col - 條碼欄數 Symbol size of col: 10 to 144

expression -

content - Content of DataMatrix 2D bar code

返回:

byte[]

dmatrix

public static byte[] dmatrix(int x,
             int y,
             int width,
             int height,
             java.lang.String expression,
             java.lang.String content)

erase

public static byte[] erase(int x,
           int y,
           int width,
           int height)

該指令用於　除影像緩衝區　部份區域的資料
This command clears a specified region in the image buffer.

参数:

x - The x-coordinate of the starting point (in dots)

y - The y-coordinate of the starting point (in dots)

x_width - The region width in x-axis direction (in dots)

y_height - The region height in y-axis direction (in dots)

返回:

byte[]

pdf417

public static byte[] pdf417(int x,
            int y,
            int width,
            int height,
            int rotate,
            java.lang.String option,
            java.lang.String content)

該指令用來打印 PDF417 二維條碼
This command defines a PDF417 2D bar code.
PDF417 x,y,width,height,rotate,[option],”content”

参数:

x - X-coordinate of starting point (in dot)

y - Y-coordinate of starting point (in dot)

width - Expected width (in dots)

height - Expected height (in dots)

rotate - Rotation counterclockwise
0 : No rotation
90 : Rotate 90 degrees
180 : Rotate 180 degrees
270 : Rotate 270 degrees

option - 参数请查看编程手册，设置多个以，隔开，例如"E4,W4,T1";

content - Content of PDF417 2D bar code

返回:

byte[]

putBmp

public static byte[] putBmp(int x,
            int y,
            java.lang.String filename,
            int bpp,
            int contrast)

This command prints BMP format images. The grayscale printing is for direct thermal mode only.
Support 1-bit (monochrome) and 8-bit (256-color) BMP graphic only.
PUTBMP x,y,”filename”[, bpp][, contract]

参数:

x - The x-coordinate of the BMP format image

y - The y-coordinate of the BMP format image

filename - The downloaded BMP filename

bpp - Optional. Bits per pixel of grayscale graphic. Default is 1. *Since V6.91EZ.
1: 1-bit (monochrome) graphic
8: 8-bit (256-color) graphic

contrast - Optional. Contrast of grayscale graphic. Default is 80. Suggested range is
from 60 to 100. *Since V6.91EZ.

返回:

byte[]

putBmp

public static byte[] putBmp(int x,
            int y,
            java.lang.String filename)

This command prints BMP format images. The grayscale printing is for direct thermal mode only.
Support 1-bit (monochrome) and 8-bit (256-color) BMP graphic only.
PUTBMP x,y,”filename”[, bpp][, contract]

参数:

x - The x-coordinate of the BMP format image

y - The y-coordinate of the BMP format image

filename - The downloaded BMP filename

bpp - Optional. Bits per pixel of grayscale graphic. Default is 1. *Since V6.91EZ.
1: 1-bit (monochrome) graphic
8: 8-bit (256-color) graphic

contrast - Optional. Contrast of grayscale graphic. Default is 80. Suggested range is
from 60 to 100. *Since V6.91EZ.

返回:

byte[]

putpcx

public static byte[] putpcx(int x,
            int y,
            java.lang.String filename)

This command prints PCX format images. TSPL language supports 2-color PCX format graphics. TSPL2 language supports 256-color PCX format graphics.
PUTPCX x,y,”filename”

参数:

x - The x-coordinate of the BMP format image

y - The y-coordinate of the BMP format image

filename - The downloaded pcx filename

返回:

byte[]

qrCode

public static byte[] qrCode(int x,
            int y,
            java.lang.String eccLevel,
            int cellWidth,
            java.lang.String mode,
            int rotation,
            java.lang.String model,
            java.lang.String mask,
            java.lang.String content)

This command prints QR code.
QRCODE x,y,ECC Level,cell width,mode,rotation,[model,mask,]”content”

参数:

x - The upper left corner x-coordinate of the QR code

y - The upper left corner y-coordinate of the QR code

eccLevel - Error correction recovery level
L : 7%
M : 15%
Q : 25%
H : 30%

cellWidth - 1~10

mode - Auto / manual encode
A : Auto
M : Manual

rotation - 0 :
0 degree
90 : 90 degree
180 : 180 degree
270 : 270 degree

model - M1: (default), original version
M2: enhanced version (Almost smart phone is supported by this version.)

mask - S0~S8, default is S7

content - The encodable character set is described as below,

qrCode

public static byte[] qrCode(int x,
            int y,
            java.lang.String eccLevel,
            int cellWidth,
            java.lang.String mode,
            int rotation,
            java.lang.String content)

This command prints QR code.
QRCODE x,y,ECC Level,cell width,mode,rotation,[model,mask,]”content”

参数:

x - The upper left corner x-coordinate of the QR code

y - The upper left corner y-coordinate of the QR code

eccLevel - Error correction recovery level
L : 7%
M : 15%
Q : 25%
H : 30%

cellWidth - 1~10

mode - Auto / manual encode
A : Auto
M : Manual

rotation - 0 :
0 degree
90 : 90 degree
180 : 180 degree
270 : 270 degree

model - M1: (default), original version
M2: enhanced version (Almost smart phone is supported by this version.)

mask - S0~S8, default is S7

content - The encodable character set is described as below,

返回:

byte[]

reverse

public static byte[] reverse(int x,
             int y,
             int width,
             int height)

This command reverses a region in image buffer.
將指定的區域反相打印
REVERSE x_start,y_start,x_width,y_height

参数:

x - The x-coordinate of the starting point (in dots)

y - The y-coordinate of the starting point (in dots)

width - X-axis region width (in dots)

height - Y-axis region height (in dots)

返回:

byte[]

text

public static byte[] text(int x,
          int y,
          java.lang.String font,
          int rotation,
          int x_multiplication,
          int y_multiplication,
          java.lang.String content)

This command prints text on label.
使用打印機　置文字(英數)打印文字
TEXT x,y,”font”,rotation,x-multiplication,y-multiplication,”content”

参数:

x - The x-coordinate of the text

y - The y-coordinate of the text

font - Font name请参考编程手册

rotation - The rotation angle of text
0 : No rotation
90 : degrees, in clockwise direction
180 : degrees, in clockwise direction
270 : degrees, in clockwise direction

x_multiplication - Horizontal multiplication, up to 10x

y_multiplication - Vertical multiplication, up to 10x

content - Content of text string

返回:

byte[]

block

public static byte[] block(int x,
           int y,
           int width,
           int height,
           java.lang.String font,
           int rotation,
           int x_multiplication,
           int y_multiplication,
           int space,
           int alignment,
           java.lang.String content)

This command prints paragraph on label.
BLOCK x,y,width,height,”font”,rotation,x-multiplication,y-multiplication,[space,]alignment,]“content”

参数:

x - The x-coordinate of the text

y - The y-coordinate of the text

width - The width of block for the paragraph in dots

height - The height of block for the paragraph in dots

font - Font name

rotation - The rotation angle of text
0 : No rotation
90 : degrees, in clockwise direction
180 : degrees, in clockwise direction
270 : degrees, in clockwise direction

x_multiplication - Horizontal multiplication, up to 10x

y_multiplication - Vertical multiplication, up to 10x

space - Add or delete the space between lines in dot.

alignment - Text alignment. 0 : default (Left);1 : Left;2 : Center; 3 : Right

content - Data in block. The maximum data length is 4092 bytes.

返回:

byte[]

block

public static byte[] block(int x,
           int y,
           int width,
           int height,
           java.lang.String font,
           int rotation,
           int x_multiplication,
           int y_multiplication,
           java.lang.String content)

This command prints paragraph on label.
BLOCK x,y,width,height,”font”,rotation,x-multiplication,y-multiplication,“content”

参数:

x - The x-coordinate of the text

y - The y-coordinate of the text

width - The width of block for the paragraph in dots

height - The height of block for the paragraph in dots

font - Font name

rotation - The rotation angle of text
0 : No rotation
90 : degrees, in clockwise direction
180 : degrees, in clockwise direction
270 : degrees, in clockwise direction

x_multiplication - Horizontal multiplication, up to 10x

y_multiplication - Vertical multiplication, up to 10x

space - Add or delete the space between lines in dot.

alignment - Text alignment. 0 : default (Left);1 : Left;2 : Center; 3 : Right

content - Data in block. The maximum data length is 4092 bytes.

checkPrinterStateByPort9100

public static byte[] checkPrinterStateByPort9100()

This command obtains the printer status at any time, even in the event of printer error. An inquiry
request is solicited by sending an (ASCII 27, escape character) as the beginning control character
to the printer. A one byte character is returned, flagging the printer status. A 0 signifies the printer is
ready to print labels.
< ESC >!?
此指令使用于9100端口，发一次，每当打印机状态改变，就有数据返回

checkPrinterStateByPort4000

public static byte[] checkPrinterStateByPort4000()

此指令使用于4000端口，发一次，打印机返回一次代表状态的数据

返回:

byte[]

downLoad

public static byte[] downLoad(java.lang.String filename)

Download 程序文档
DOWNLOAD ”EXAMPLE.BAS”

参数:

filename - FILENAME The name of data file that will remain resident in the printer memory

返回:

byte[]

downLoad

public static byte[] downLoad(java.lang.String filename,
              int size,
              java.lang.String content)

Download 文本文档
DOWNLOAD ”FILENAME” ,DATA SIZE,DATA　CONTENT...

参数:

filename - FILENAME The name of data file that will remain resident in the printer memory

size - 文本大小

content - 字符串content为要存储到打印机的文本内容

返回:

byte[]

downLoad

public static byte[] downLoad(java.lang.String filename,
              java.lang.String filepath)

Download 文本文件
DOWNLOAD ”FILENAME” ,FILE SIZE,DATA　CONTENT...

参数:

filename - FILENAME The name of data file that will remain resident in the printer memory

filepath - filepath要存储到打印机内存的文本文件的文件路径

返回:

byte[]

downLoad

public static byte[] downLoad(java.lang.String filename,
              Bitmap bitmap)

Download 图档
DOWNLOAD ”FILENAME.PCX” ,FILE SIZE,DATA　CONTENT...

参数:

filename - FILENAME The name of data file that will remain resident in the printer memory

bitmap - 要存储到打印机内存的图像文件的bitmap对象,必需是单色图

返回:

byte[]

eop

public static byte[] eop()

End of program. To declare the start and end of BASIC language commands used in a program, DOWNLOAD “FILENAME.BAS “ must be added in the first line of the program, and “EOP “ statement at the last line of program.
EOP

返回:

byte[]

files

public static byte[] files()

This command prints out the total memory size, available memory size and files lists (or lists the files through RS-232) in the printer memory (both FLASH memory and DRAM).
FILES

返回:

byte[]

kill

public static byte[] kill(java.lang.String filename)

This command deletes a file in the printer memory. The wild card (*) will delete all files resident in specified DRAM or FLASH memory.
KILL ”FILENAME”

参数:

filename - The name of data file that will delete in the printer memory (case sensitive)

返回:

byte[]

move

public static byte[] move()

This command moves downloaded files from DRAM to FLASH memory.
MOVE

返回:

byte[]

run

public static byte[] run(java.lang.String filename)

This command executes a program resident in the printer memory. It is available for TSPL2 language printers only.
RUN “FILENAME.BAS”
This command can be replaced to filename that without typing “.BAS”.

参数:

filename - 打印机内存中的文件名称

返回:

byte[]